SLAUGHTERING MACHINES |
|
|
|
- HYDRAULIC SHEARS C 90
-----------------------------------
- SHEEP HYDRAULIC SHEARS
--------------------------------
- PIG DEHAIRER
----------------------------
- C600 - C700 - C900 TRIPE CENTRIFUGAL CLEANING MACHINE
-------------------------------------------------------------------
- SKULL SPLITTER MACHINE
----------------------------
- GUT CUTTING/CLEANING MACHINE
--------------------------------------
- PIG BLEEDING TAPE
--------------------------------------
- CATTLE EVISCERATION PLATFORM
-----------------------------------------
- RITUAL SLAUGHTER BOX (MUSLIM BOX)
--------------------------------------------
- PIG STUNNING BOX (250 KG)
--------------------------------
- PIG STUNNING BOX (200 KG)
---------------------------------
- PIG HAIR BURNING TUNNEL
-------------------------------
- PIG BRUSHING TUNNEL
---------------------------
- PIG SCALDING TANK WITH AUTOMATIC FEEDER
----------------------------------------------------- |
|
| |
|
  |
HYDRAULIC SHEARS C90
Use: the hydraulic shears C 90 cut with high precision the limbs and bones of half-carcasses, the complete operating cycle takes 3.5 sec.
Technical specifications
Raw material: stainless steel
Weight: Kg. 17.2
Controls: tyres
Front size: 320 mm
The shears are equipped with a pneumatic hand safety device.
Hydraulic central unit
Voltage 230/400 V (three-phase)
Power: Kw 4
Operating pressure: 240 bars
Cutting power: Kg. 4,000
Unloaded weight: Kg. 45
Available upon request: 85° C
water jet sterilizing tanks (code 20.55.000) and balancer (code 20.54.000).
|
|
|
|
  |
SHEEP HYDRAULIC SHEARS
Use: the shears allow performing a neat cut of the limbs and bones of sheeps and goats during the slaughtering cycle.
Available upon request: special 85°C hot water jet sterilizing unit (cod. 20.55.000) and tool balancer (cod. 20.54.000)
Technical specifications
Raw material: stainless steel
Weight: Kg. 3.60
Hydraulic central unit
Supply: V 230/400 (three-phase)
Power: Kw 2.2
Size (mm): length: 480 - width: 500 - height: 770
Weight: Kg. 40
Hydraulic operating pressure: 80 – 90 bars |
|
|
|
 |
PIG DEHAIRER
Use: this machine is used to automatically remove the hair after scalding inside the slaughtering plant. It is electrically/pneumatically operated.
Technical specifications
Frame: hot galvanized steel
Protections and accessories: AISI 304 stainless steel
Pneumatic operating pressure: 6 bars
Hour output: 40 heads/hour
Weight: Kg. 800
|
|
|
|
 |
C600 - C700 - C900 TRIPE CENTRIFUGAL CLEANING MACHINE
Use: cleaning, whitening and defatting of cattle tripes (with suitable inside accessories).
High reliability and productivity
Layout: available in three different models, with different size and capacity for different production/hour needs.
Technical specifications
Frame: AISI 304 stainless steel
Voltage: V 230/400 – Hz 50/60
Electric motor: IP 55 – 1,450 rpm
Power: Hp 2 - Kw 1.1 Size (mm): width 790 – height 1,010
Cleaning tank size (mm): inner Ø 580 – height 325
Weight: Kg. 70 |
|
|
|
 |
SKULL SPLITTER MACHINE
Extremely versatile machine equipped with trolley.
Use: this machine (equipped with the suitable blades) can be used to treat the skull of the cattles to be destroyed by incineration (“mad cow” – legislation on BSE) or (with a different type of blades) for the standard processing of the animals intended for human consumption.
Note – for customised needs, this machine can be equipped with a special blade suitable for the treatment of skulls: cattles – pigs – sheeps - horses. |
|
|
|
 |
GUT CUTTING/CLEANING MACHINE
Use: used to empty the guts from excrements, remarkably reducing the time needed to dispose of the offals.
Technical specifications
Frame: AISI 304 stainless steel
Size (mm): length: 1,400 - width: 1,300 – loading height: 1,050
Weight: Kg. 800
Output: 30/40% of the initial product
Cycle output: 5 stomachs of adult cattles
Voltage: V 400 - Hz 50/60
Power: Kw 9.2
Components
1) Filling lid
2) Lid micro safety device
3) Cold water inlet electric-valve
4) Hot water inlet coupling
5) Product outlet door
6) Fat removal holes
7) Moto-reducer
8) Knife holder
|
|
|
|
 |
PIG BLEEDING TAPE
Use: this machine is used for pig bleeding, after slaughtering in the processing plant. The bleeding tape is installed between the stunning box and the scalding tank. The operating cycle time can be adjusted according to the output needed. The machine is operated by a hydraulic motor equipped with a reducer (A). The hydraulic central unit is supplied upon request (option).
Technical specifications
Frame: AISI 304 stainless steel
Sliding table: aluminium or polyethylene shooks
Length: determined according to the customer’s needs.
Hydraulic operating pressure: 50 bars |
|
|
|
 |
CATTLE EVISCERATION PLATFORM
Use: lifting platform for the operator who carries out the cattle evisceration in slaughtering plants.
Note – The platform is equipped with a hydraulic central unit (A) installed in the upper part. Upon request, tool sterilizing sink (B) available as option. The pedal control (C – D) allows lifting and lowering the platform, leaving the operator’s hands free.
Technical specifications
Operation: hydraulic
Frame: AISI 304 stainless steel + aluminium + Teflon
Weight: Kg. 350
Capacity: Kg. 120
Size (mm): length: 1,500 - width: 850 – minimum height from the floor: 400
Hydraulic central unit
Electrical supply: V 400 - Hz 50
Power: Kw 2.2
Unloaded weight: Kg. 45
Operating pressure: 80 bars
Oil tank capacity: Lt. 35 |
|
|
|
 |
RITUAL SLAUGHTER BOX (MUSLIM BOX)
Use: this machine is used in order to kill the cattle according to the Muslim and Jewish religions that forbid the consumption of animal killed by any method other than bleeding and stunning is not allowed.
Technical specifications – Hydraulic operation, including 180° machine rotation.
|
|
|
|
 |
PIG STUNNING BOX
Use: The machine is pneumatically operated and is used to immobilize the pig immediately before stunning it by electric head tongs.
Note - This type of boxes needs two operators. One operator stuns the animal and opens up the unloading gate. The second operator lets the animal into the box.
Technical specifications
Frame: stainless steel or galvanized steel.
Total weight: Kg. 250 |
|
|
|
 |
PIG STUNNING BOX
Use: The machine is pneumatically operated and is used to immobilize the pig immediately before stunning it by electric head tongs.
Note - This machine needs only one operator. The weight of the pigs to be stunned must not be lower than 50 Kg.
Highly reliable and user-friendly.
Size (mm): 1500 x 600 x 2700
Weight: Kg. 200 |
|
|
|
 |
PIG HAIR BURNING TUNNEL
Customised size available for special needs. |
|
|
|
 |
PIG BRUSHING TUNNEL
Use: this machine is used to automatically remove the residual hair after pig dehairing. The pig is let into the tunnel, hung at the overhead rail, head down. The synthetic “whips” remove the residual hair. Water jets from upper and side injectors ease this operation.
Technical specifications
Frame: AISI 304 stainless steel
Size: customised size available for special needs.
4 brushing shafts operated by 4 motor-reducers (A)
Approximate weight: Kg. 1,320
Water supply: 2 inlets of 1’’ gas - 32 injectors |
|
|
|
  |
PIG SCALDING TANK WITH AUTOMATIC FEEDER
Use: this unit is used to carry out the pig timed scalding by hot water inside the processing plant.
Technical specifications
The pig shifting rotor (A) is rotated by a hydraulic motor equipped with motor-reducer (B).
Frame: AISI 304 stainless steel
Feeder: hot galvanized steel
Hour output: 35 ÷ 80 heads/hour
Size (mm): length: 3,500 - width: 2,500 - height: 2,500
Unloaded weight: Kg. 1000
Voltage V 400 - Hz 50
Power: 2 x Kw 4
Hydraulic operating pressure: 100 bars
Options
Available upon request; pig automatic reversing unit (C) with supporting frame (D). The reversing platform (C) operation is controlled by a photocell. The scalding central unit (E) controls the hydraulic operation.
|
|
| |
